home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
GRAVIS Top 100 #12
/
GRAVIS CD 12.cdr
/
GRAVIS
/
Internet
/
Eudora Light 3.1.3
/
README
< prev
Wrap
Text File
|
1999-06-10
|
11KB
|
268 lines
================================
EUDORA LIGHT FOR MACINTOSH 3.1.3
================================
This is version 3.1.3 of Eudora Light for Macintosh. This README provides
information on the following topics:
* Minimum Requirements
* Drag and Drop Requirements
* Installation
* New Features and Changes in 3.1.3
* License and Legal Information
======================
MINIMUM REQUIREMENTS
======================
To use Eudora Light for Macintosh, you must have the following:
* A Macintosh Plus or later model.
* Macintosh System 7.0 or later.
* A mail account with an Internet service provider or an Internet-style
network account.
* Access to your mail account via a modem or Internet-style network
connection.
============================
DRAG AND DROP REQUIREMENTS
============================
If you do not have MacintoshÆ Drag and Drop running on your Macintosh,
certain features may be disabled. Macintosh Drag and Drop is included in
System 7.5 and System 7 Pro, but is not in earlier versions of System 7.
Macintosh Drag and Drop requires that Finder 7.1.3 or newer is running for
the Drag and Drop extensions to work properly. Installing the Drag and Drop
extensions with an older Finder has been shown to cause strange behavior,
and is not recommended.
If you are running a system version with a Finder that is older than 7.1.3,
you will be able to drag and drop within the Eudora application. However,
you will not be able to drag between Eudora and other running applications.
==============
INSTALLATION
==============
You can install this version of Eudora Light over an earlier version of
Eudora Light. Just follow the instructions below, and when you open the new
version of Eudora, your Settings, mailboxes, etc. will be updated for the
new version.
To install Eudora Light, do the following:
1. Copy the Eudora Light software onto your hard disk.
The latest version of Eudora Light for the Macintosh
can be found at ftp.eudora.com or www.eudora.com. (If
you are installing from diskettes, skip to the next step.)
2. Restart your Macintosh while holding down the shift key.
This turns off your Macintosh extensions. (You must hold
down the shift key until you see the message
"Extensions off.")
3. If you are installing from diskettes, insert Eudora Light
diskette 1 of 2 into your Macintosh diskette drive.
4. Double-click on the Eudora Light Installer icon to start the
installation program. The Eudora Light splash screen is
displayed. Click Continue to display the Eudora README window.
Note: The contents of the README window can be printed or
saved to a file for later review.
5. Once you have reviewed the contents of the README window,
click Accept. The Eudora Install dialog is displayed, allowing
you to select which items you want to install. To see a
description of an item, click on the item (the description is
displayed just below the selection area).
6. To install all of the items, be sure the default item
Eudora Light is selected and click Install.
To install just the items you want, select them by clicking
on each one (hold down the command key to select multiple
items, and be sure that the Eudora Light item is not selected),
then click Install.
If you selected the Eudora Light installation item, the Restart
dialog is displayed, informing you that your Macintosh will
need to be restarted at the end of the installation. Click Yes.
The Eudora Version Selection dialog is displayed, allowing you
to select which version you want to install.
680x0
This is the smallest version. It runs on any Macintosh,
including Power Macs, but on Power Macintoshes it is
not as fast as the PowerPC or Universal versions.
PowerPC
This version runs only on Power Macintoshes. It does not
run on standard 680x0 machines.
Universal (or Fat)
This version requires the most disk space. It runs on any
Macintosh, and on a Power Macintosh runs as fast as the
PowerPC version.
7. Select the version you want. A dialog is displayed asking you
where you want to install the Eudora Light 3.1.3 Folder.
8. Select the destination folder and click Install. The install
program begins installing the items you selected onto the
appropriate locations on your disk.
9. If you are installing Eudora from diskettes, insert the
appropriate installation diskette when you are prompted.
10. Once the installation is complete, you are prompted to
restart your Macintosh.
Click Restart.
This completes the installation of the Eudora Light software. To find out
how to set up Eudora so that you can send and receive e-mail, see the
"Configuration" section in the README installed with the software, and also
see the User Manual section "Opening and Configuring Eudora." For details
about the files in the Eudora Folder (in your System Folder) and the Eudora
Light Application Folder, see their corresponding sections in the Reference
chapter of the User Manual.
===================================
NEW FEATURES AND CHANGES IN 3.1.3
===================================
Auto-configuration
________________
Auto-configuration support has been added to Eudora
by using the Internet standard Application Configuration
Access Protocol (ACAP). ACAP is a client/server protocol
which allows Eudora to retrieve configuration settings
from a central server. These settings include those
that must be set up for you to start sending and
receiving e-mail, such as your POP account name and
SMTP host.
In order for you to use the auto-configuration settings, your
system administrator or service provider must set up a central
server with your personal settings. You can then download
those settings whenever you like. Typically, you would do
so only when you first start using Eudora. However, you
can restore your settings to their original values at any time
by downloading them down again.
To download your settings, open the Settings dialog under
the Special menu and click on the Auto. Configure icon. Fill
in the ACAP Server Name and the ACAP Server Username fields;
your system administrator or service provider should have told
you what to enter in these fields. Click the Fetch
Settings Now button and the Auto Configuration password dialog
box appears. Type in your password in the password field
and press the Configure Automatically button to download your
settings from the ACAP server.
The following ACAP-related information primarily for use by
system administrators and/or service providers.
If the "If no account configured, try fetching settings from an
ACAP server" setting (#217) is on ("y"), then when Eudora is first
launched (actually any time Eudora is launched without a POP
account having been specified), the Auto-Configure panel of the
Settings dialog is displayed. In the absence of that switch, the
Settings dialog's Getting Started panel would appear instead.
The setting for the ACAP Server is #218, and the setting for the
ACAP Server Username is #219.
The port ID used in communicating with the ACAP server is
setting #10109.
You can obtain detailed information on setting up an ACAP server
to support Eudora clients on the Eudora web site. go to
http://www.eudora.com/techsupport, click Frequently Asked
Questions (FAQ), then click Automatic Initial Configuration with ACAP.
Note: The upcoming version 2.0 release of the Eudora WorldMail Server
will support auto-configuration of Eudora clients.
Pre-configuring the POP server
__________________________
System administrators can now pre-configure Eudora by putting
the Mail Host (POP) server name in the Settings dialog, so that
the user needs only to add his or her account name. When Eudora
is launched, it displays the Getting Started window of the Settings
dialog, the Mail Host (e.g., domainname) displaying the correct
Mail Host setup in your Settings panels.
For example, suppose the Mail Host you required was assigned
xyz.qualcomm.com. When you start Eudora, Getting Started automatically
displays xyz.qualcomm.com in the Mail Host field. You just need to
insert your username in the Username text field.
=====================
LICENSE AGREEMENT
=====================
QUALCOMM Incorporated
License Terms for Eudora Light Version 3.1.3 - Macintosh Platform
QUALCOMM grants to the user a nonexclusive license to use this Eudora
Software solely for User's own personal or internal business purposes. The
user may not commercially distribute, sublicense, resell, or otherwise
transfer for any consideration, or reproduce for any such purposes, the
Eudora software or any modification or derivation thereof, either alone or
in conjunction with any other product or program. Further, the user may not
modify the Eudora Software, other than for User's own personal or internal
business use.
THE EUDORA SOFTWARE IS PROVIDED TO THE USER ''AS IS.'' QUALCOMM MAKES NO
WARRANTIES, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE MACINTOSH EUDORA
SOFTWARE AND/OR ASSOCIATED MATERIALS PROVIDED TO THE USER, INCLUDING BUT
NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR AGAINST INFRINGEMENT. QUALCOMM DOES NOT WARRANT THAT THE
FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT
THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT
DEFECTS IN THE SOFTWARE WILL BE CORRECTED. FURTHERMORE, QUALCOMM DOES NOT
WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE
USE OF THE SOFTWARE OR ANY DOCUMENTATION PROVIDED THEREWITH IN TERMS OF
THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY QUALCOMM OR A QUALCOMM AUTHORIZED
REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF
THIS WARRANTY.
LIMITATION OF LIABILITY -- QUALCOMM AND ITS LICENSORS ARE NOT LIABLE FOR
ANY CLAIMS OR DAMAGES WHATSOEVER, INCLUDING PROPERTY DAMAGE, PERSONAL
INJURY, INTELLECTUAL PROPERTY INFRINGEMENT, LOSS OF PROFITS, OR
INTERRUPTION OF BUSINESS, OR FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL
DAMAGES, HOWEVER CAUSED, WHETHER ARISING OUT OF BREACH OF WARRANTY,
CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR OTHERWISE.
Copyright © 1988-1992 by the University of Illinois Board of Trustees.
Copyright © 1992-1997 by QUALCOMM Incorporated. Portions of the
Eudora Software were written by Scott Gruby and Pete Resnick.
All rights reserved.
Portions of the Eudora Software were written by John Norstad,
Copyright © 1988-1990 Northwestern University, and David Johnson,
Copyright © 1984 Brown University. All rights reserved.
The MacTCP and Communications Toolbox software are copyrighted by
Apple Computer, Inc. All rights reserved.
AppleTalk, Macintosh and Power Macintosh are registered trademarks of
Apple Computer, Inc.
LocalTalk, MacTCP and Communications Toolbox are trademarks of
Apple Computer, Inc.
EudoraÆ is a registered trademark and Eudora ProÅ and Eudora LightÅ
are trademarks of QUALCOMM Incorporated.
QUALCOMM is a registered trademark and registered service mark of
QUALCOMM Incorporated.
All other trademarks and service marks are the property of
their respective owners.
October 1997